? coilcraft, inc. 2011 specifications subject to change without notice. please check our website for latest information. surface mount wideband rf transformers document 591-1 document 591-1 revised 02/04/10 part 3 db 2 db 1 db number (mhz) (mhz) (mhz) pwb-1-al_ 0.08 ? 450 0.13 ? 325 0.30 ? 190 pwb-1.5-al_ 0.03 ? 300 0.035 ? 250 0.06 ? 150 pwb-2-al_ 0.05 ? 200 0.06 ? 160 0.10 ? 100 pwb-4-al_ 0.15 ? 500 0.24 ? 300 0.60 ? 140 pwb-16-al_ 0.05 ? 80 0.06 ? 75 0.11 ? 30 pwb1010l_ 0.0035 ? 125 0.0045 ? 100 0.007 ? 80 pwb1010-1l_ 0.03 ? 250 0.04 ? 225 0.06 ? 200 pwb1015l_ 0.07 ? 225 0.10 ? 200 0.20 ? 125 pwb1040l_ 0.15 ? 400 0.25 ? 350 0.80 ? 250 pwb-1-bl_ 0.13 ? 425 0.18 ? 325 0.32 ? 190 pwb-1.5-bl_ 0.50 ? 250 0.80 ? 175 1.50 ? 120 pwb-2-bl_ 0.20 ? 400 0.225 ? 275 0.50 ? 150 pwb-4-bl_ 0.14 ? 700 0.20 ? 400 0.40 ? 150 pwb-16-bl_ 0.075 ? 90 0.11 ? 75 0.20 ? 65 pwb2010l_ 0.0035 ? 125 0.0045 ? 100 0.007 ? 80 pwb2010-1l_ 0.03 ? 250 0.04 ? 225 0.06 ? 200 pwb2040l_ 0.15 ? 400 0.25 ? 350 0.80 ? 250 pwb-1-cl_ 0.10 ? 300 0.13 ? 200 0.20 ? 150 pwb-1.5-cl_ 0.15 ? 200 0.225 ? 150 0.35 ? 100 pwb-2-cl_ 0.13 ? 285 0.20 ? 175 0.325 ? 125 pwb-4-cl_ 0.14 ? 500 0.20 ? 230 0.40 ? 110 pwb3010l_ 0.0035 ? 125 0.0045 ? 100 0.007 ? 80 pwb3010-1l_ 0.03 ? 250 0.04 ? 225 0.06 ? 200 pwb3015l_ 0.07 ? 225 0.10 ? 200 0.20 ? 125 pwb3040l_ 0.15 ? 400 0.25 ? 350 0.80 ? 250 dimensions typical frequency response 6 6 5 4 0.283 0.010 7,20 0,25 0.267 0.008 6,77 0,20 0.256 0.008 6,48 0,20 0.175 0.008 4,45 0,20 0.100 0.004 2,54 0,10 0.100 2,54 0.290 7,37 0.06 1,52 0.04 1,00 0.05 1,27 0.02 0,5 recommended land pattern 1 1 2 3 part number indicates pin 1 internal code xxxx yyyy china core material ferrite terminations rohs compliant tin-silver-copper over tin over nickel over phos bronze. other terminations available at additional cost. weight 250 ? 270 mg ambient temperature ?40c to +85c storage temperature component: ?40c to +85c. packaging: ?40c to +80c resistance to soldering heat max three 40 second reflows at +260c, parts cooled to room temperature between cycles moisture sensitivity level (msl) 1 (unlimited floor life at <30c / 85% relative humidity) failures in time (fit) / mean time between failures (mtbf) 60 per billion hours / 16,666,667 hours, calculated per telcordia sr-332 packaging 250/7 reel; 1000/13 reel plastic tape: 16 mm wide, 0.35 mm thick, 12 mm pocket spacing, 5.0 mm pocket depth pcb washing only pure water or alcohol recommended ? cost effective surface mount wideband transformers ? 300 v interwinding isolation, 1/4 watt rf input power ? 250 ma max current rating. dimensions are in inches mm
? coilcraft, inc. 2011 specifications subject to change without notice. please check our website for latest information. document 591-2 revised 02/04/10 document 591-2 impedance insertion pins 1-3 pins 6-4 ratio 2 bandwidth i dc loss max l min 3 dcr max l min 3 dcr max type part number 1 pri:sec (mhz) (ma) (db) (h) (ohms) (h) (ohms) pwb-1-al_ 1:1 0.08 - 450 250 0.60 40 0.070 40 0.070 pwb-1.5-al_ 1:1.5 0.03 - 300 250 0.35 110 0.080 160 0.110 pwb-2-al_ 1:2 0.05 - 200 250 0.25 75 0.088 150 0.120 pwb-4-al_ 1:4 0.15 - 500 250 0.50 25 0.075 98 0.135 pwb-16-al_ 1:16 0.05 - 80 250 0.35 75 0.260 1250 0.910 pwb1010l_ 1:1 0.0035 - 125 250 0.20 780 0.320 780 0.320 pwb1010-1l_ 1:1 0.03 - 250 250 0.20 95 0.200 95 0.200 pwb1015l_ 1:1.5 0.07 - 225 250 0.40 51 0.130 80 0.145 pwb1040l_ 1:4 0.15 - 400 250 0.40 25 0.115 95 0.160 pwb-1-bl_ 1:1 0.13 - 425 250 0.40 22 0.070 22 0.070 pwb-1.5-bl_ 1:1.5 0.50 - 250 250 0.40 140 0.100 200 0.120 pwb-2-bl_ 1:2 0.20 - 400 250 0.35 75 0.088 150 0.130 pwb-4-bl_ 1:4 0.14 - 700 250 0.50 25 0.075 98 0.135 pwb-16-bl_ 1:16 0.075 - 90 250 0.30 75 0.260 1250 0.910 pwb2010l_ 1:1 0.0035 - 125 250 0.20 780 0.320 780 0.320 pwb2010-1l_ 1:1 0.03 - 250 250 0.20 95 0.200 95 0.200 pwb2040l_ 1:4 0.15 - 400 250 0.40 25 0.115 95 0.160 pwb-1-cl_ 1:1 0.10 - 300 250 0.60 22 0.070 22 0.070 pwb-1.5-cl_ 1:1.5 0.15 - 200 250 0.30 140 0.110 200 0.120 pwb-2-cl_ 1:2 0.13 - 285 250 0.30 75 0.105 150 0.130 pwb-4-cl_ 1:4 0.14 - 500 250 0.50 25 0.075 98 0.135 pwb3010l_ 1:1 0.0035 - 125 250 0.20 780 0.320 780 0.320 pwb3010-1l_ 1:1 0.03 - 250 250 0.20 95 0.200 95 0.200 pwb3015l_ 1:1.5 0.07 - 225 250 0.40 51 0.130 80 0.145 pwb3040l_ 1:4 0.15 - 400 250 0.40 25 0.115 95 0.160 1. when ordering, please specify termination and packaging codes: pwb-3010-1 ld termination: l = rohs compliant tin-silver-copper over tin over nickel over phos bronze. special order: s = non-rohs tin-lead (63/37). packaging: c =7 machine ready reel. eia-481 embossed plastic tape, 250 parts per full reel. b = less than full reel. in tape, but not machine ready. to have a leader and trailer added ($25 charge), use code letter c instea d. d =13 machine ready reel. eia-481 embossed plastic tape. factory order only, not stocked (1000 parts per full reel). 2. impedance ratio is for the full primary winding to the full secondary winding. 3. inductance tested at 130 khz, 0.1 vrms, 0 adc. 4. electrical specifications at 25c. measurements are referenced to 50 ohms. refer to doc 362 ?soldering surface mount components? before soldering. 6 4 3 1 type a 3 1 6 5 4 type b 6 5 4 3 2 1 type c surface mount wideband rf transformers
? coilcraft, inc. 2011 specifications subject to change without notice. please check our website for latest information. document 591-3 revised 02/04/10 document 591-3 8 7 6 5 4 3 2 1 -1 0 0.01 0.1 1 10 100 1000 dbm attenuation frequency (mhz) 8 7 6 5 4 3 2 1 -1 0 0.001 0.01 0.1 1 10 100 dbm attenuation frequency (mhz) 8 7 6 5 4 3 2 1 -1 0 0.01 0.1 1 10 100 1000 dbm attenuation frequency (mhz) 8 7 6 5 4 3 2 1 -1 0 0.01 0.1 1 10 100 1000 dbm attenuation frequency (mhz) 8 7 6 5 4 3 2 1 -1 0 0.01 0.1 1 10 100 1000 dbm attenuation frequency (mhz) 8 7 6 5 4 3 2 1 -1 0 0.01 0.1 1 10 100 1000 dbm attenuation frequency (mhz) 8 7 6 5 4 3 2 1 -1 0 0.01 0.1 1 10 100 1000 dbm attenuation frequency (mhz) 8 7 6 5 4 3 2 1 -1 0 0.01 0.1 1 10 100 1000 dbm attenuation frequency (mhz) 8 7 6 5 4 3 2 1 -1 0 0.01 0.1 1 10 100 1000 dbm attenuation frequency (mhz) type a transformers pwb-1-a 3 db bandwidth 0.08 - 450 mhz pwb-1.5-a 3 db bandwidth 0.03 - 300 mhz pwb-2-a 3 db bandwidth 0.05 - 200 mhz pwb-4-a 3 db bandwidth 0.15 - 500 mhz pwb-16-a 3 db bandwidth 0.05 - 80 mhz pwb1010-1 3 db bandwidth 0.03 - 250 mhz pwb1015 3 db bandwidth 0.07 - 225 mhz pwb1040 3 db bandwidth 0.15 - 400 mhz pwb1010 3 db bandwidth 0.0035 - 125 mhz attenuation measured on a network analyzer (re: 50 ohms)
? coilcraft, inc. 2011 specifications subject to change without notice. please check our website for latest information. document 591-4 revised 02/04/10 document 591-4 8 7 6 5 4 3 2 1 -1 0 0.01 0.1 1 10 100 1000 dbm attenuation frequency (mhz) 8 7 6 5 4 3 2 1 -1 0 0.01 0.1 1 10 100 1000 dbm attenuation frequency (mhz) 8 7 6 5 4 3 2 1 -1 0 0.01 0.1 1 10 100 1000 dbm attenuation frequency (mhz) 8 7 6 5 4 3 2 1 -1 0 0.01 0.1 1 10 100 1000 dbm attenuation frequency (mhz) 8 7 6 5 4 3 2 1 -1 0 0.01 0.1 1 10 100 1000 dbm attenuation frequency (mhz) 8 7 6 5 4 3 2 1 -1 0 0.01 0.1 1 10 100 1000 dbm attenuation frequency (mhz) 8 7 6 5 4 3 2 1 -1 0 0.01 0.1 1 10 100 1000 dbm attenuation frequency (mhz) 8 7 6 5 4 3 2 1 -1 0 0.001 0.01 0.1 1 10 100 dbm attenuation frequency (mhz) type b transformers pwb-1-b 3 db bandwidth 0.13 - 425 mhz pwb-1.5-b 3 db bandwidth 0.50 - 250 mhz pwb-2-b 3 db bandwidth 0.20 - 400 mhz pwb-4-b 3 db bandwidth 0.14 - 700 mhz pwb-16-b 3 db bandwidth 0.075 - 90 mhz pwb2010-1 3 db bandwidth 0.03 - 250 mhz pwb2040 3 db bandwidth 0.15 - 400 mhz pwb2010 3 db bandwidth 0.0035-125 mhz attenuation measured on a network analyzer (re: 50 ohms)
? coilcraft, inc. 2011 specifications subject to change without notice. please check our website for latest information. document 591-5 revised 02/04/10 document 591-5 8 7 6 5 4 3 2 1 -1 0 0.01 0.1 1 10 100 1000 dbm attenuation frequency (mhz) 8 7 6 5 4 3 2 1 -1 0 0.01 0.1 1 10 100 1000 dbm attenuation frequency (mhz) 8 7 6 5 4 3 2 1 -1 0 0.01 0.1 1 10 100 1000 dbm attenuation frequency (mhz) 8 7 6 5 4 3 2 1 -1 0 0.01 0.1 1 10 100 1000 dbm attenuation frequency (mhz) type c transformers pwb-1-c 3 db bandwidth 0.10 - 300 mhz pwb-1.5-c 3 db bandwidth 0.15 - 200 mhz pwb-2-c 3 db bandwidth 0.13 - 285 mhz pwb-4-c 3 db bandwidth 0.14 - 50 mhz pwb3010 3 db bandwidth .0035-125 mhz pwb3010-1 3 db bandwidth .03 - 250 mhz pwb3015 3 db bandwidth .07 - 225 mhz pwb3040 3 db bandwidth .15 - 400 mhz 8 7 6 5 4 3 2 1 -1 0 0.01 0.1 1 10 100 1000 dbm attenuation frequency (mhz) 8 7 6 5 4 3 2 1 -1 0 0.01 0.1 1 10 100 1000 dbm attenuation frequency (mhz) 8 7 6 5 4 3 2 1 -1 0 0.01 0.1 1 10 100 1000 dbm attenuation frequency (mhz) 8 7 6 5 4 3 2 1 -1 0 0.001 0.01 0.1 1 10 100 dbm attenuation frequency (mhz) pwb3010-1 3 db bandwidth 0.03 - 250 mhz pwb3015 3 db bandwidth 0.07 - 225 mhz pwb3040 3 db bandwidth 0.15 - 400 mhz pwb3010 3 db bandwidth 0.0035 - 125 mhz attenuation measured on a network analyzer (re: 50 ohms)
|
